Risk Reduction Solutions for
Pharmaceutical, Life Sciences & Healthcare
Aerosolised Versus Bioquell’s Hydrogen Peroxide Vapour
All decontamination technologies are not created equal, let alone all hydrogen peroxide based technologies. While the wording may sound similar, major differences between aerosolised hydrogen peroxide (aHP) and Hydrogen Peroxide Vapour exist. Sifting through the jargon and understanding the differences can reduce HAIs and save lives.
Key Differences Between Vapourised and Aerosolised Hydrogen Peroxide
More Effective with Less
According to a study in Infection Control and Hospital Epidemiology (ICHE), a single Bioquell system was more effective and faster than 2 aerosolised hydrogen peroxide units. The aerosolised units failed to deactivate 50% of the biological indicators over a series of tests, while Bioquell achieved a 100% success rate.
Always One Active Ingredient
Bioquell’s Hydrogen Peroxide Vapour technology only uses a 35% hydrogen peroxide solution with no other active ingredients. Various aerosolised options will attempt to account for a lower hydrogen peroxide level, ranging from one to twenty percent, with additives such as peracetic/acetic acid, silver nitrate and orthophosphoric acid being distributed in your patient rooms.
Invisible and Comprehensive Distribution with Repeatable Results
Hydrogen Peroxide Vapour will encompass every exposed surface in an enclosed area, providing consistent efficacy throughout. The unique properties of the vapourised process allow for this to occur even on complex shapes or tough to reach areas. Users of aerosolised hydrogen peroxide will discover inconsistent results, larger visible droplets and areas minimally impacted by the process.
UNDERSTANDING BIOQUELL
We are always upfront and direct about our decontamination methodology, safety features and our hydrogen peroxide solutions. When evaluating technologies, be sure to compare them against Bioquell in the following areas as well:
Free of Residue and Harsh Odors
Bioquell Hydrogen Peroxide Vapour leaves no residue on your equipment or spaces, eliminating any concern or inconvenience. Even the most sensitive of electronics have shown no ill-effects. Many facilities will bring in more equipment from other areas when possible. Contact us for a materials compatibility study provided.
Safety is Primary
Safety is our primary objective, for your patients and for the operators of the decontamination equipment. Each system for a hospital comes with a handheld sensor to easily assess leaks, vent sealers, emergency aeration and extensive training. Always ask about safety features such as these for any decontamination system you are reviewing.
Removing the Peroxide
If a system disperses a decontamination solution, how is that same solution being removed? With Bioquell, the answer is simple. Aeration units automatically turn on at the proper time to actively remove the Hydrogen Peroxide Vapour from the air and will inform you when this is complete. Carbon filters rapidly turn Hydrogen Peroxide Vapour into water vapour and oxygen. How do other systems account for this important step? How do they check the concentration left in the air before re-entry and re-occupation?
Single Cycle
Because the Bioquell process is completely automated and includes aeration, each step operates swiftly without losing its pronounced efficacy. The system never needs to be repositioned to account for shadowed areas or to compensate for poor distribution. Bioquell is proven faster than aerosolised systems while offering far greater efficacy.
Contact Us
To learn more about how Bioquell can fit your solution, please contact us.
UK Contact
Ecolab Ltd
52 Royce Cl,
Andover SP10 3TS, UK
+44 (0)1264 835 835
[email protected]
